The fuel injection system is the heart of your diesel engine.  Variations in fuel quality have a negative affect on the precision fuel injection systems found in modern diesel engines.  Reduced power, premature wear, and damage can occur from poor fuel quality.  Stanadyne Fuel  Additives provide protection and extend the life of your fuel system year round!

• Developed by a diesel fuel injection system manufacturer
• Approved and recommended by name from major engine and vehicle manufactures
• Proven to perform the best in independent testing
• Compatible with all diesel engine applications new or old, big or small

Performance Formula® – All Season Protection

If you have a high performance diesel, you need a high performance fuel! This is where Stanadyne’s Performance Formula is a must. Even with a stock truck the benefits are noticeable. Now, throw in the mileage improvements, and it pays for itself! This is one additive that that actually lives up to the hype. You will not be disappointed.

Treatment Ratio 1:500

• The premium, all-season, all purpose diesel fuel additive, designed to tackle virtually any diesel fuel related problem.
• Approved by many OEMs including GM, Ford, Deere & Navistar.
• Meets Cummins L10 Superior Deposit Test for cleanliness.

Cold Weather Protection – reduces #2 diesel fuel pour point by up to 40°F (22°C) and cold filter plug point by up to 25°F (13°C), depending upon base fuel.
Hot Weather Protection – lubricants and cetane improver help when fuel is hot and “thin”.
Increases Horsepower – with up to 5 point cetane gain, resulting in better acceleration, power, smoother running and reduced engine noise.
Improves Fuel Economy – independent tests have shown an average of 4% improvement in MPG and gains up to 9.6%.
Easier and Faster Start-Up – in cold weather, when fuel can gel or very hot conditions, when fuel viscosity is low.
Reduces Smoke and Particulate Emissions – helps pass smoke-meter tests.
Cleans and Protects Injectors and Other Components – detergents and deposit modifiers help remove varnish and other deposits to prevent plugging.
Reduces Wear of Expensive Fuel Systems – lubricants protect against effects of low sulfur fuel.
Upgrades and Stabilizes Fuel – no need to buy expensive “premium” or blended fuel. Keeps fuel fresher and reduces sludge.
Helps Remove Water – special water demulsifier causes tiny water droplets to come out of suspension/emulsion, so the filter/water separator can be more effective.
Alcohol Free – avoids corrosion and accelerated wear.
Bio Diesel Compatible – Up to 20% bio content approved, increased water separation shown in bio content up to B20
How to Treat – add before filling.
Storage – room temperature recommended.

Size Treatment Case Quantity Part Number

8 oz “One Shot”  30 gal.* 24 38564

Pint  60 gal. 12 38565

1/2 Gallon  240 gal. 6 38566

5 Gallons  2,500 gal. 1 38567

55 Gallon  27,500 gal. 1 38568

*Special formulation ratio for “One Shot” application.

Performance Formula® – Injector Cleaner

Performance Formula® Injector Cleaner is a special formula made to prevent and eliminate Internal Diesel Injector Deposits (IDID) commonly found in Common Rail and other type of Injectors. These deposits affect injector performance, which result in poor running conditions.

Performance Formula Injector Cleaner has concentrated detergents designed to eliminate internal and external deposits from injectors and other fuel system components.  Restored engine performance, increased power, and improved fuel economy are achieved.

Other benefits and recommendations:

• Lubricates fuel system components to help prevent wear
• Improves combustion with cetane improver resulting in better starting, smoother running, and reduced engine noise
• Use 4 – 6 times per year as preventive maintenance or when engine performance issues arise
• Continued use of Performance Formula All Season or Performance Formula Warm Weather is recommended on each fill-up

Size Treatment Case Quantity Part Number

8 oz “One Shot”  30 gal.* 24 43562

Pint  120 gal. 12 43564

1/2 Gallon 480 gal. 6 43566

Warm Weather Blend

This is a lower cost alternative to Performance Formula. It does not have cold weather protection or the cetane improver. The cetane improver contributes to better mileage which makes the Performance Formula attractive even if you do not need the cold weather protection.  The Warm Weather Blend is recommended in temperatures are above 40 degrees Fahrenheit.

Treatment Ratio 1:1000

• The lower cost summer alternative to Performance Formula®.
• Approved by Ford.

Most of the features of Performance Formula® – but without the cetane improver and cold weather protection.
Economical – lower cost compared to Performance Formula®.
Alcohol Free – avoids corrosion and accelerated wear.
How to Treat – add before filling.
Storage – room temperature recommended.

Size Treatment Case Quantity Part Number

8 oz “One Shot”  30 gal.* 24 38569

Pint  120 gal. 12 38570

1/2 Gallon 480 gal. 6 38571

5 Gallons 5,000 gal. 1 38572

55 Gallon Call to order. 55,000 gal. 1 38573

*Special formulation ratio for “One Shot” application.

Winter 1000®

This is a budget priced additive for cold weather protection only.

Treatment Ratio 1:1000

Budget priced cold weather protection.

Fuel Gelling Protection – pour point reduced by as much as 40°F (22°C), depending on base fuel gel point.
Reduces Filter Waxing – cold filter plug point reduced up to 25°F (13°C), depending on base fuel starting point.
Reduces Ice Formation – water demulsifiers and freeze depressants help keep fuel water free.
Cleans and Protect – detergents help remove deposits.
Alcohol Free – avoids corrosion and accelerated wear.
How to Treat – add before filling.
Storage – room temperature recommended.

Size Treatment Case Quantity Part Number

Pint  120 gal. 12 38574

5 Gallons  5,000 gal. 1 38575

55 Gallon  55,000 gal. 1 38576

Lubricity Formula^TM

This is specially formulated for use with very dry, poor quality fuels such as ultra-low sulfur, jet fuel, kerosene, or straight number one diesel fuel.

Treatment Ratio 1:1000

• Specially formulated for use with very dry, poor quality or “winter blend” fuels such as ultra-low sulfur, jet fuel, kerosene or #1 diesel.
• Recommended wherever fuel system component wear is a major problem.
• Approved by Volkswagen.

Extra Strength Lubricant – five times more lubrication content than other additives.
Reduces Wear – combats the wear caused by low sulfur, dry fuel.
Ideal for Blended Fuels or #1 Diesel – restores lubricity, when cold weather fuels are used.
Cleans Deposits – detergents keep nozzles and injectors clean.
Combats Rust and Corrosion – extends engine life.
Alcohol Free – avoids corrosion and accelerated wear.
How to Treat – add before filling.
Storage – room temperature recommended.

Size Treatment Case Quantity Part Number

8 oz “One Shot” 15 gal.* 24 38559

Pint  120 gal. 12 38560

1/2 Gallon  500 gal. 1 38561

5 Gallons  5,000 gal. 1 38562

55 Gallon 55,000 gal. 1 38563

*Special formulation ratio for “One Shot” application.

Case quantities are shown and are suggested to be used for easiest shipment, but the prices are the same for one or a whole case, so order any quantity you like.

Note – Due to FAA regulations fuel additives can not be air shipped, and may only be shipped UPS Ground.

  Warning:  These products can expose you to chemicals including Naphthalene, which is known to the State of California to cause cancer, and Toluene which is known to the State of California to cause birth defects or other reproductive harm.  Form more information go to www.P65Warnings.ca.gov